Baume & Mercier Clifton 65717 Manual Del Usuario página 14

Setting the moon
4. Press the corrector button (C4), until the full moon
appears in the center of the moon phase aperture (I).
5. Then press the corrector button (C4) as many times as
there are days passed since the last full moon (consult a
calendar).
To know the dates of the full moon and set your watch, please
visit our website www.baume-et-mercier.com and consult the
page corresponding to your model.
Adjusting the date
6. Press the corrector button (C3), until the date hand (E)
is positioned on the 1.
Setting the month
7. Press the corrector button (C2) to advance the month
(M) until the desired month.
Setting the date
8. Press the corrector button (C3) to advance the date (E)
to the desired date.
Setting the day of the week
9. Press the corrector button (C1), to advance the day (K)
to the desired day.
Setting the time
10. Turn the crown to advance the hands (A, B) clockwise
and position them at the desired time.
11. When the start of the set time is announced (reference
clock, radio, etc.), reset the crown to Position 1.
For months with fewer than 31 days, it is necessary to
change the date manually at the end of the month.
10 |
SIMPLE CHRONOGRAPH
18 19 20 21 23 24 25 26
P1: Start/stop push-button. Press once to start the
chronograph (F=seconds, G =minutes, H=hours).
Press a second time to stop and a third time to start
the chronograph again.
P2: Reset push-button. Once the chronograph has been
stopped by pressing the P1 push-button, press the P2
to reset all counters to zero.
To measure several successive times, without counting
i n t e r va l s , p r e s s t h e P 1 p u s h - b u t t o n s e v e r a l t i m e s
consecutively, as follows:
1. Start.
2. Stop and read.
3. Start.
4. Stop and read.
This operation may be repeated as often as desired to
measure successive times.
5. Press the P2 push-button to reset the chronograph to zero.