Baume & Mercier Clifton 65717 Manual Del Usuario página 11

RAPID DATE CHANGE
Warning: In order to prevent damage to the movement, it
is extremely important that you do not use the rapid date
change function between 8 p.m. and 2 a.m.; this is when
the movement pinions are working to automatically change
the date.
Date change using the crown
4 6 8 10 11 13 18 19 20 21 22 23 24 26
1. Set the crown in Position 2.
2. Turn the crown either clockwise or counterclockwise,
depending on the model, until the desired date (E)
appears.
3. Reset the crown Position 1.
For months with less than 31 days, the date must be changed
manually at the end of the month.
Rapid date change with corrector
If your watch comes equipped with a corrector (C1) for
setting the date, press the corrector button (C1) several times
in succession, so as to advance the date (E) to the desired date.
To do this, use the small tool provided in the watch packaging.
For months with less than 31 days, the date must be changed
manually at the end of the month.
RAPID DAY CHANGE
24
Warning: In order to prevent damage to the movement, it
is extremely important that you do not use the rapid day
change function between 8 pm and 2 am; this is when the
movement pinions are working to automatically change
the day.
1. Pull the crown to Position 2.
2. Turn the crown clockwise until the desired day (K)
appears.
3. Reset the crown Position 1.
DUAL TIME
Warning: Do not adjust immediately after re-setting the
time on your watch in a counter-clockwise direction. This
may damage the movement. In this specific situation, wait
approximately 30 minutes before setting the second time zone.
Adjustment by crown
Set the crown in Position 2, and then turn it clockwise to set
the second time zone hand (D) at the desired time.
Adjustment by corrector
If your watch has a corrector, press the corrector button (C1)
several times to move the second time zone hand (D) forward
25
and position it to the time of the desired zone. To do this, use
the small tool provided in the watch packaging.
RETROGRADE DATE
To set you r watch, please perform these steps in the
following order:
Setting the day of the week
1. Pull the crown to Position 3
2. Turn the crown in either direction until the day hand
(K) indicates the day immediately preceding the desired
day.
3. Position the hands (A, B) at 2 a.m.
8 22
13
14
| 7