Setting the time depending on where one is
(local time)
If traveling to a different time zone, the hour hand must
be set.
1. Pull the crown to Position 2.
2. Turn the crown to advance or reverse the hour hand (A)
by jumping an hour and position to the desired time.
3. Press the crown Position 1.
ANNUAL CALENDAR
16
Wa rn i ng: To prevent damage to the movement , it is
extremely important that you do not adjust your rapid date
setting between 8 p.m. and 2 a.m.; this is when the movement
pinions are working to automatically change the date.
To adjust your watch, please respect the following steps in
this specific order:
Setting the time
1. Set the crown to Position 3, which will stop the seconds
hand (C).
2. Turn the crown clockwise to advance the hands (A, B)
until they are positioned at the desired time.
Note : When the hands pass the numeral 12, if the date
changes, it means it is midnight, and if the date does not
change, it means it is noon.
3. When the start of the set time is announced (reference
clock, radio, etc.), reset the crown to Position 1.
Rapid date and month correction
1. Set the crown in Position 2.
2. Turn it to advance the date (E) and month (M)
chronologically, until the desired month is displayed,
then the desired date.
3. Reset the crown Position 1.
Note: The annual calendar on your watch is able to keep
track of 30 day months; the month of February is treated as
a 30-day month. At the end of February, you must adjust the
date setting manually using the rapid date change function.
COMPLETE CALENDAR WITH MOON PHASE
Warning: To avoid the risk of jamming the corrector buttons
or damaging the movement, it is essential you not make any
adjustment (day, date, month and moon phase) between 3
p.m. and 1 a.m.
To manipulate the corrector buttons, use the small tool
provided in the watch packaging.
To set you r watch, please perform these steps in the
following order:
Adjusting the time
1. Pull the crown to Position 2, the seconds hand (C) will
stop moving.
2. Turn the crown to advance the hands (A, B) clockwise
until the date (E) and day (K) change (when the watch
indicates midnight).
3. Continue to turn the crown to set the hands to 3 a.m.
17
| 9