Aftercare; Charging - Philips BG9041 Manual Del Usuario

Aftercare

Charging

After use, you can safely apply lotions, creams, deodorant, moisturizer or
cosmetics to the treated areas. If you experience skin irritation or skin
redness after treatment, wait until it disappears before applying any product
to your skin. If you experience skin irritation after applying a product to your
skin, wash it off with water.
Note: when following all instructions you may still get skin reactions. In this
case stop using the device and contact the consumer care center in your
country.
Fully charge the batteries before you use the device for the first time and
when the batteries are empty. Fully charging the batteries takes up to 1 hour
and 40 minutes. Charge the device when the charging light lights up orange
during use to indicate that the battery is low and will run out soon. Fully
charged batteries provide at least 130 flashes at light intensity 5. Fully charge
the device every 3 to 4 months, even if you do not use the appliance for a
longer time.
Charging the device:
1 Switch off the device.
2 Insert the small plug into the device and put the adapter in the wall
socket.
-
The charging light flashes white to indicate that the appliance is
charging.
-
When the batteries are fully charged, the charging light lights up white
continuously.
Notes: The adapter and the device feel warm during charging. This is
normal.
Note: This device is equipped with battery-overheat protection and does
not charge if the room temperature exceeds 40°C.
-
Never cover the appliance and device during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the device.
Note: The battery functionality is not enough for a full body treatment. We
recommend you to use the device attached to the wall socket while treating
large body areas such as legs and/or arms.
Tip: Charge the device after each use to save battery life.
English
25