Safety Symbols; Safety Instructions - EGO HT2400E Manual De Utilización

SAFETY SYMBOLS

EN
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
May be used in conjunction with other symbols or pictographs.
WARNING!
foreign objects being thrown into your eyes, which can result in
severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face
shield when needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side shields.
4
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
Indicates DANGER, WARNING, OR CAUTION.
The operation of any power tools can result in

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate.
Safety Alert
Read the Operator's
Manual
Do not expose to
rain
Blade length
61cm
Ø 22mm
Cutting capacity
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read
operator's manual.
WARNING: Do not use in the rain or leave
outdoors while it is raining.
The length of the blade
Max. Cutting capacity of the blade
Voltage
Current
Frequency (cycles per second)
Power
Time
EN
5