Residual Risk; Symbol Meaning; Safety Alert Symbol; Safety Instructions - EGO CHT2000E Manual Del Operador

READ ALL INSTRUCTIONS!
EN
READ & UNDERSTAND
INSTRUCTION MANUAL

Residual risk!

People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
4
12-VOLT LITHIUM-ION GRASS/SHRUB SHEAR — CHT2000E
Indicates DANGER,
Indicates a potential personal
Safety Alert
injury hazard.
Read The To reduce the risk of injury,
Operator's user must read operator's
Manual manual.
Do Not Expose Do not use in the rain or leave
To Rain outdoors while it is raining.
Always wear safety goggles
Wear Eye or safety glasses with side
Protection shields and a full face shield
when operating this product.
Never attempt to operate your
power tool with one hand.
Loss of control of the power
tool resulting in serious or
Keep hands and fatal injury may result. To
feet away from reduce the risk of cut injuries,
the cutting tool keep hands and feet away
from the cutting tool. Never
attach a moving cutting tool
with your hand or any other
part of your body.
cutting means
continues cutting means continues
to run after to run after the motor is
the motor is switched off!
switched off!
Keep
bystanders Keep bystanders away!
away!
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating
Type of current
Current
Type or a characteristic of
Direct Current
current
n No Load Speed Rotational speed, at no load
0
... /min Per Minute Revolutions per minute
Original instructions