Reheat function
The reheat function enables you to warm bread without browning it. As an
example, for toast that has gone cold. The bread is only briefly warmed.
1) Insert the bread and press the toasting lever
2) Press the "Reheat" button
lamp on the "Reheat" button
3) Once the bread has warmed up again, the toaster switches itself off auto-
matically, the indicator lamp on the "Reheat" button
bread slices are ejected upwards.
Defrost function
By pressing the "Defrost" button
toasted. In this mode, the toaster slowly warms the bread.
1) After setting the desired browning level, insert the bread into the toaster
slots
2) Press the toasting lever
3) Press the "Defrost" button
button
4) When the defrosting and toasting process is finished, the toaster switches
itself off automatically, the indicator lamp in the "Defrost" button
goes out and the bread slices are ejected upwards.
Warming up crusty bread rolls
NEVER place bread rolls directly on the toaster, ALWAYS use the warming rack
1) Press the lever for the warming rack
2) Place the bread rolls onto the rack and start the toasting procedure. Set the
toasting dial
depending on the composition and type of bread roll.
NOTE
►
Place the rolls onto the warming rack
fall through the rack
►
After toasting, the rolls will be very hot.
3) As soon as the toaster switches itself off, turn the rolls over to toast the other
side and then switch the toaster back on.
■
44
│
GB │ MT
.
downwards.
lights up.
to a maximum of level 3. The browning can, however, vary,
.
down.
. During the heating process, the indicator
lights up.
frozen bread can also be thawed and
. The indicator lamp on the "Defrost"
down until it is completely extended.
in such a manner that they cannot
goes out and the
.
SDLT 1500 A2