Before First Use; Operation; Adjusting The Browning Level; Toasting - Silvercrest SDLT 1500 A2 Instrucciones De Uso

Before first use
■ Operate the toaster without bread 3 times at the maximum browning level (7).
■ Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTE
► The toasting lever
mains power socket.
► With the first usage a slight smell can arise (minimal smoke development
is also possible). This is normal and dissipates after a short time. Ensure
sufficient ventilation. For example, open a window.

Operation

Adjusting the browning level

The desired browning level can be adjusted infinitely from "light" (1) to "dark" (7)
using the toasting dial
NOTE
► Note that, subject to the thickness of the bread in the toaster, the level of
browning can vary somewhat even if the toasting dial
adjusted! The fewer the number of slices inserted, the higher the browning
level. Thus, if you are not intending to toast many slices, always set the
toasting dial

Toasting

CAUTION – RISK OF FIRE!
► When the appliance is in operation, do NOT cover the toasting slots
There will be a risk of fire! The appliance could be irreparably damaged!
1) After setting the desired browning level, insert the bread into the toasting slots
2) Press the toasting lever
centres the inserted bread in the toasting slots
3) When the desired level of browning has been reached, the toaster automati-
cally switches itself off and the slices are ejected upwards.

Stopping the toasting process

If you wish to stop toasting, press the "Cancel" button
itself off and the bread slices are ejected upwards.
SDLT 1500 A2
only engages when the cable is connected to a
.
a little lower.
downwards. The automatic bread centring device
has not been
.
. The toaster switches
GB │ MT │ 43
.
.
■