Interrupting The Toasting Process; Warming Function; Defrost Function; Warming Up Crusty Bread Rolls - Silvercrest SDLTD 1400 A1 Instrucciones De Uso

Interrupting the toasting process

GB

Warming function

Defrost function

Warming up crusty bread rolls

20
If you wish to interrupt the toasting procedure, press the "Stop" button 4.
The toaster switches itself off and the bread slices are ejected upwards.
The warming function enables you to warm bread without browning it. As
an example, for toast that has gone cold. The bread is only briefl y warmed.
1) Insert the bread and press the operating slide 3 down.
2) Press the „Warm up" button
lamp integrated in the „Warm up" button
3) When the bread has been reheated, the appliance switches itself off auto-
matically and the slices are ejected upwards.
By pressing the "Defrosting" button
and toasted. With this, the toaster slowly warms the bread.
1) After setting the desired browning level, insert the bread into the toaster
slots 1.
2) Press the operating slide 3 downwards.
3) Press the "Defrosting" button
4) When the defrosting and toasting process is fi nished, the toaster switches itself
off automatically, the control lamp integrated in the "Defrosting" button
goes out and the bread slices are ejected to the top.
NEVER lay bread rolls directly onto the toaster, ALWAYS use the bread-roll
attachment 2.
1) Place the bread-roll attachment 2 on the toaster so that it is fi rmly seated in
the designated hollows.
2) Place the bread-rolls onto the holder and start the toasting procedure. For
a medium browning, set the toasting dial 5 to level II. The browning can
however vary, depending on the composition and type of bread roll.
NOTICE
Place the rolls onto the bread-roll attachment 2 in such a manner that
►
they cannot fall through the bread-roll attachment 2.
► After toasting, the rolls will be very hot.
7. During the warm up process the control
7 glows.
8, also frozen bread can be thawed
8. The integrated control lamp glows.
8
SDLTD 1400 A1