Operating The Baby Unit; Switching The Baby Unit On And Off; Indicator Leds; Lullabies - NUK Eco Control Audio 530D+ Instrucciones De Operación

The nightlight and the lullabies can be
switched on in Eco-Mode only after a delay.
If you press the corresponding button in
Eco-Mode, you will initially see a flashing
symbol (musical note or lightbulb) on the
display of the parent unit. This indicates that
the selected function could disturb your
baby. You now have up to 30 seconds to
press the button again to leave the function
disabled. Otherwise, as soon as the next
link check is carried out, the function will be
executed and the nightlight or lullabies will
switch on automatically.
The talk-back function is deactivated in
Eco-Mode. If you try to use the talk-back
function in Eco-Mode, the flashing symbol
appears in the display and a double beep
signals that this function is deactivated.
Sound transmission in Eco-Mode
In Eco-Mode, no sounds are transmitted
that fail to reach the specified noise
threshold (see "6.8 Using the VOX function
to adjust the transmission sensitivity" on
page 40).
The device automatically
transmission mode as soon as your baby
makes a noise that exceeds your selected
5.1 Switching the baby unit on
and off
The baby unit 1 will switch on automatically
as soon as you have connected the mains
adapter and plugged it into the power
supply. You can subsequently switch the
baby unit on or off at any time:
• To switch the baby unit 1 on or off, press
the On/Off button 19.

5.2 Indicator LEDs

• The Power LED 10 lights up green while
the baby unit is switched on.
• The VOX LED 11 on the baby unit lights
up green when there is an established
connection between it and the parent
unit.
switches to

5. Operating the baby unit

sound threshold (VOX levels 1 - 4). Eco-
Mode is deactivated immediately and the
connection indicator 18 stops flashing and
remains continuously lit.
At VOX level 5 the device transmits
continuously and Eco-Mode is deactivated.
If you want to check that everything is OK
while Eco-Mode is activated (although this
already indicates that your baby is sleeping
peacefully), you can deactivate Eco-Mode by
switching to permanent transmission mode:
1. press the VOX button 22 on the parent
unit 12.
2. Then hold the Vol + button 15 down until
all 5 LEDs 21 are lit.
Notes:
– It can take up to 30 seconds to
deactivate Eco-Mode.
– If you switch over to continuous
transmission mode, the device will not
automatically revert to Eco-Mode.
3. To return to Eco-Mode, press the button
VOX 22 on the parent unit, and then
repeatedly press VOL - 16 until only from
1 to 4 LEDs 21 are lit.
• The VOX LED 11 will not be lit while the
baby unit 1 is switched to Eco-Mode or if
it was not possible to set up a connection
to the parent unit.

5.3 Lullabies

This NUK babyphone has four especially
composed lullabies and soothing natural
sounds to help you soothe your baby and
lull it to sleep.
1. To activate the lullabies on the baby unit 1,
press the Lullabies on/off button 7.
Note: The lullabies can also be activated
from the
"6.10 Lullabies" on page 41).
36
parent unit 12 (see