12. Maintenance; Recommended Lubricants/Oil Mist Lubricator; Cleaning And Servicing; Service Intervals - Sicam SBM 855 Manual Original

en 44 | SBM 855 | Maintenance

12. Maintenance

12.1 Recommended lubricants/oil mist
lubricator
Component Lubricant
Compressed air system ESSO FEBIS K 32
Tab. 2: Lubricant table
!
The manufacturer cannot accept any liability for da-
mage arising from the use of other lubricants.
12.2

Cleaning and servicing

!
Before cleaning and servicing, switch off SBM 855
and disconnect mains plug.
!
Do not use any solvent-based cleaning agents. Use
alcohol or similar cleaning agents for plastic parts.
The following work is essential to ensure proper opera-
tion and high performance of the SBM 855:
12.2.1

Service intervals

Servicing
Clean moving mechanical parts, treat with spray oil
or kerosene and lubricate with engine oil or
a suitable grease.
Remove condensate.
Check the oil level in the oil mist lubricator.
Replace the oil in the oil mist lubricator.
Tab. 3: Service intervals
12.2.2

Removing condensate

1. Turn the red knob at the bottom of the water separa-
tor counter-clockwise.
2. Remove the accumulated condensate.
3. Turn back the red knob at the bottom of the water
separator.
|
656 229 2010-11-22
12.2.3
1. Remove the compressed air connection.
2. Screw the container to the oil mist lubricator.
3. Top up with oil.
Standard
ISO 32
12.2.4
1. Remove the compressed air connection.
2. Screw the container to the oil mist lubricator.
3. Drain off and dispose of the oil.
4. Fill with fresh oil.
12.3
The manufacturer cannot accept any liability for
damage arising from the use of non-genuine replace-
ment parts.
x
Designation
x
Standard centering flange
x
Quick-action clamping nut
x
Centering cone 42 - 64,5 mm
Centering cone 54 - 79,5 mm
Centering cone 74 - 111,5 mm
Weight pliers
Manual vernier caliper
Test clip
Calibration weight
Calibration weight (calibrated)
Voltage sticker
Direction of wheel rotation sticker
Tab. 4:

Topping up oil in oil mist lubricator

Replacing oil in oil mist lubricator

Spare and wearing parts

Spare and wearing parts
Sicam snc società unipersonale
Order number
602 400
616 200
632 500
652 862
605 600
606 500
629 400
602 700
654 377
654 376
100 789
653 878