Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2) VIBRATIONS LEVEL
Average weighted hand-transmitted vibration value, in frequency, the user is ex-
posed to measured in compliance with EN ISO 5349/1-2:
Direct shear
Shear with 0.5 m fixed length extension pole
Shear with 1.0 m fixed length extension pole
Shear with 1.5 m fixed length extension pole
Shear with 2.0 m fixed length extension pole
Shear with 2.5 m fixed length extension pole
Shear with 3.0 m fixed length extension pole
Shear with 0.70 ÷ 1.10 m telescopic extension pole in fibreglass
Shear with 1.25 ÷ 1.95 m telescopic extension pole in fibreglass
Shear with 1.85 ÷ 3.15 m telescopic extension pole in fibreglass
Shear with 1.25 ÷ 1.95 m telescopic extension pole in aluminium a
Shear with 1.85 ÷ 3.15 m telescopic extension pole in aluminium a
The resulting values, according to the auxiliary tools which have been used, have
turned out to be high, since they overcome the reference limit of 2.5 m/s
The following obligations have to be fulfilled:
• The operator shall undergo a periodic check up.
• The operator shall be informed about the vibrations risks.
• The tool can be used continuously no more than 6 hours per day.
Product Description
The pneumatic shears with a single cutting blade are specifically fit for pruning orchards.
The air cylinder inside the handle (5) provides the cutting power required.
A lever (12) on the handle (12) makes it work. When releasing the lever, the safety catch
(11) is automatically on.
WARNING: Do not use the shears to cut material other than that specified
above as they may be severely damaged and cause injury to the operator.
Main features of the shears
• Pneumatic working.
• Ergonomically-designed magnesium handle (5).
• Ergonomic control lever (12).
• Finger guard (13).
• Hardened steel blades (8).
• Safety catch (11).
• Possible connection to extensions (25).
Specifications
• Handgrip diameter: ................................................................................................ 55 mm
• Cutting diameter: ................................................................................................... 35 mm
• Working pressure: ............................................................................... 1000 kPa (10 bar)
• Max. air consumption: ..................................................................................... Nl/min 0.9
• Weight: ............................................................................................................. 710 grams
10 - 40
DESCRIPTION
2
a
= 3.29 m/s
heq
2
a
= 2.80 m/s
heq
2
a
= 1.10 m/s
heq
2
a
= 1.66 m/s
heq
2
a
= 1.23 m/s
heq
2
a
= 0.91 m/s
heq
2
a
= 0.77 m/s
heq
2
a
= 1.19 m/s
heq
2
a
= 0.93 m/s
heq
2
a
= 0.83 m/s
heq
2
= 1.06 m/s
heq
2
= 0.83 m/s
heq
2
.
Tabla de contenido
