RHOSS MACROSYSTEM CCAM105 Instrucciones De Uso página 24

II.2.1.2 Installation of models with fans d=630–
910mm
INSTALLATION WITH HORIZONTAL AIR FLOW
The units are normally provided ready for installation in a vertical
position and with horizontal air flow.
The unit must be fastened to the ground with the feet highlighted in the
figure.
It is advisable to place anti-vibration material between the unit and the
support surface.
Fig. 5
INSTALLATION WITH VERTICAL AIR FLOW
If you wish to install the unit in a horizontal position with vertical air flow,
it is first of all necessary to move the electrical board following these
instructions
• Remove the 4 screws that hold the electrical board (2 under and 2 over)
Fig. 6
SECTION II: INSTALLATION AND MAINTENANCE
24