RS Pro RSHS800 Serie Manual De Uso página 29

Press Recorder → Scope Trend Plot to enter the interface
shown above, under which you can set the required parameter.
1. Record Time
The time from the beginning of drawing the scope trend plot to
The current record time.
2. Data Percentage
The percentage of the recorded data occupied in the total storage
data.
3. Measured Value
The current measured value of channel 1 parameter.
4. Data/Time
Reflect the relationship between the measured value and the
record time, which is defined as the time of the intersection of the
vertical scale and the scope trend curve.
5. Measurement Parameter
Press the corresponding menu key to make the
parameter trend curve. Three types of parameters including
voltage, time and delay are accessible to select.
6. Vertical Scale
Value of the current selected parameter displayed at the vertical
scale.
29