RS Pro RSHS800 Serie Manual De Uso página 23

Trigger setting
Trigger
Press the button to enter trigger system, under which five
types of trigger including edge, pulse, video, slope and alternative
are available, and each of them can be set in auto, normal or single
mode.
System setting
Press the button to enter user system, under which the
User
system status and auxiliary functionalities like buzzer, language
and print setup are accessible to view or set. In addition, some
advanced functions like self calibration, updating firmware and
waveform recording are also supported.
Storage setting
Save
Recall
Press the button to enter Save/Recall system, under which
four types of file including setups, waveforms, picture and CSV are
accessible to save or recall, as well as recalling of the factory
settings.
Cursor measurement
Press the button to enter cursor measurement system,
Cursor
under which three measurement types including voltage, time and
delay are selectable, and each parameter can be measured in
manual, track or auto mode.
Run setting
Run/Stop Press the button to set the state of the instrument to "Run" or
"Stop". In "Stop" state, the logo at the upper left corner of the screen turns red.
RSHS800
23
17