RS Pro RSHS800 Serie Manual De Uso página 26

2. Connection Diagram
Displayed on the screen based on the parameter you select to
show you correct connecting method.
3. DC/AC Mark
If a DC parameter (DC voltage or DC current) is selected, the
mark "DC" will be displayed at the upper right corner of the screen;
If a AC parameter (AC voltage or AC current) is selected, the mark
"AC" will be displayed at the upper right corner of the screen.
4. Operation Mode
The selectable operation types are Auto or Manual. Diode,
Continuity and Capacitance are not designed with the operation
mode.
5. Measurement Range
Range that suits to the current measured value. In auto mode,
the instrument will automatically select the appropriate range based
on the measured value; In manual mode, if the current
measured value exceeds the current range, an alarm sounds
to remind you to change to the correct range.
6. Parameter Value
The current measured value. Whether the Relative is set to On or
Off, the actual measured value equals to the displayed value,
and will not be affected by relative value saved previously.
20
26
RSHS800