Setting To Initial Set (Factory Presets); Wsetting To Initial Set - Panasonic AW-HE870E Manual Del Operador

Setting to initial set (Factory presets)

wSetting to initial set

In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
When initialization is performed, all of the camera menu's
setting values except for Format and Component will return
to factory presets.
1. Select "Initialize Data" on the main menu screen of each
Use Mode.
Press the ENTER/AWB switch, then "Initialize Data"
screen below is displayed for about 10 seconds.
Initialize Data
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K.
CANCEL
Note
p When initialization is performed, all values set prior
to initialization will be cleared, and they cannot be
restored.
2. Select O.K. and press the ENTER/AWB switch within
about 10 seconds to return to the initial settings, the
existing settings are initialized, the screen below is
displayed, and the camera returns to main menu.
3. If the CANCEL is selected and ENTER/AWB switch is
pressed, or if the O.K. is selected and the ENTER/AWB
switch is not pressed, within about 10 seconds, the
screen below is displayed, and the camera returns to
main menu, and the existing settings are not initialized.
- 87 (E) -
Halogen Mode
initialized
Halogen Mode
unchanged