Menu item setting/changing (User Mode)
N Flare correction level setting
[Flare R/G/B: 0 to 100]
Flare correction level can be adjusted.
O Black stretch setting [Black Stretch: Off, On]
Black stretch to correct the suppression of black portions
at low luminance can be set to OFF or ON.
P SD (576i) 2D LPF [SD 2D LPF: Off, Low, High]
This enables the cross colour of the composite and Y/C
signal output to be reduced by two levels.
The setting of this item has no effect on the HD (1080i or
720p) format, RGB, Y/Pb/Pr or SDI signals.
Q EBU matrix setting [EBU Matrix Set: Off, On]
Off: This reverts settings of the colour matrix, colour
correction and chroma level adjustment back to
respective levels prior to the EBU matrix setting.
On: This enables the EBU matrix setting to be selected
for the colour matrix, chroma level adjustment and
colour correction items.
(Refer to "Setting the EBU matrix" on page 86.)
R Video output format setting
[Format: 576i, 720p, 1080i]
This enables the video output format to be selected.
(Refer to "Changing the format settings" on page 84.)
S Down-conversion mode selection
[Downconv. Mode: Squeeze, Sidecut]
Squeeze or Sidecut can be selected as the
down-conversion mode for the SD (576i) format.
- 81 (E) -