When Using A Router; Initial Connections (When Using A Router) - Panasonic BL-WV10 Guía De Configuración Inicial

Getting Started
1.3

When Using a Router

Before connecting your cameras to the BL-WV10, make sure that each camera's
firmware version meets the requirements noted on page 6. If necessary, refer to
the operating instructions included with the camera and update the firmware.
Note
• Make sure your router's DHCP feature is turned on. Refer to the operating
instructions included with your router for more information.
• If you are using a wireless router, connect the BL-WV10 to the router using an
Ethernet cable. Wireless connection to the router is not supported.
1.3.1

Initial Connections (When Using a Router)

To
power
outlet
AC cord
(included)
To TV
1.
Connect the BL-WV10 to your TV using the included video cable.
2.
Turn on the TV and set the TV's input switch to the external video input
("VIDEO", "EXT", "INPUT 1", etc.)
3.
Set the mode switch on the rear of the BL-WV10 to SETUP.
4.
Connect an Ethernet cable to one of the LAN jacks on the router and to one
of the LAN jacks on the BL-WV10.
5.
Connect the router to the power outlet and turn it on.
6.
Connect the AC cord to the AC adaptor and to the power outlet.
10
Video output
DC IN jack
AC adaptor
(included)
DC cord
Video cable
(included)
terminal
LAN jacks
To
power
outlet
Ethernet cable
Rear panel of BL-WV10
Router
To LAN jack