Air Filter; Seat; Wheels; Registrations - GOLDONI 30HST Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
Do not open the hydrostatic transmission oil circuit reservoir (n.2 fig.14)
unless it is strictly necessary. This is to prevent air from getting into the
circuit since this is extremely harmful to the hydrostatic transmission.

6.5 AIR FILTER

The filter (n.4 fig.14) should be cleaned whenever indicator light n.3 fig.2 come
on.
The filter is cleaned by blowing compressed air from the inside of the filter
towards the outside.
Change the filter cartridge as needed or at a maximum of every 300 hours.

6.6 SEAT

Distance regulation: with lever n.30 fig.1.
Seat firmness regulation: with knob n.29 fig.1.
Tractors with EEC approved seats have the following adjustments:
• Lever 32 fig.1 - seat height adjustment
• Lever 31 fig.1 - seat firmness adjustment according to operator weight: less
than 70 kg or more than 70 kg. Kg.

6.7 WHEELS

Front
Tyres
6x12"
6.5/80x12"
7.00x12"
23-8.50x12"
6x12"FD
23-10.50x12"

6.8 REGISTRATIONS

6.8.1 Brake link rod

When brake pedal take-up is excessive or when one wheel's braking
performance is different from the other, register the nuts on the link rods n.1
fig.15, collocated on both sides.

6.8.2 Registering tractor parking brake

If the tractor does not maintain its parked position even with pedal n.7-8 fig.1
completely released in the neutral position, register the zero position of the
hydraulic pump. Follow these steps to do this:
1 Remove the right front side panel from the centre tunnel.
TYRE INFLATION PRESSURE
Bar
Kpa
1.9
190
2.0
200
2.0
200
1.5
150
2.0
200
1.5
150
Tyres
250/80x18"
260/80x20"
12.4R20"
33-12.50x15"
9.5x18"FD
36-13.50x15"
89
Rear
Bar
KPa
2.0
200
1.6
160
1.6
160
1.4
140
2.2
220
1.4
140
Tabla de contenido
loading

Tabla de contenido