Teaching In The User Finger (Index Administration Mode) - G-U BKS Manual De Instrucciones

Operating instructions
Fingerprint scanner and code keypad

3.3 Teaching in the user finger (index administration mode)

Operating instructions, edition 3 dated 03/01/2013
Copyright © G-U GmbH, 2012. All rights reserved.
The device is operational, only the blue LED
lights up. The master fingers must not be taught
in as user fingers!
Master
Drag a master finger across the sensor, the red
finger
and green LEDs light up briefly.



Drag a user finger across the sensor, if the
teach-in operation has been successful, the
green LED lights up.
Timeout: Do not allow more than 10 s to elapse
between the individual user finger teach-in op-
erations as otherwise the teach-in procedure
must be repeated.
We recommend you teach in each user finger 3
times in order to optimise the detection rate.
With "problematic" fingers, it may be necessary
to teach in the same user fingers up to 6 times
or use a different finger.
Press Button E (Enrollment) on program-
ming device (at the bottom on the right)
Enter an ID of between 1 and 150 via the
programming device
Press OK button to confirm
Page 40
C 59 501 106