Identification - G-U BKS Manual De Instrucciones

Operating instructions
Fingerprint scanner and code keypad

2.5 Identification

Operating instructions, edition 3 dated 03/01/2013
Copyright © G-U GmbH, 2012. All rights reserved.
Master Scan the master finger again to finish the teach-
in operation. The red and green LEDs light up
finger
briefly.
The device is operational, only the blue LED
lights up.
Drag the user finger across the sensor. If the
finger is detected, the green LED lights up and
the relay is switched
If the finger is not detected, the red LED lights
up.
Page 33
C 59 501 106