Functions In Conjunction With The Programming Device; Abbreviations And Key Assignments Of Programming Device - G-U BKS Manual De Instrucciones

Operating instructions
Fingerprint scanner and code keypad

3 Functions in conjunction with the programming device

Each time a button is pressed, the green LED lights up to confirm this. If the green LED does not light
up, repeat the input.
3.1 Abbreviations and key assignments of programming
device:
MF = Master Finger
E = Enroll (record finger)
D = Delete (delete finger)
DA = Delete All (delete all, incl. master finger)
H = Security (High), M = Security (Medium), L = Security (Low)
RT = Relay switching Time
B = Block (block IDs)
UB = Unblock (unblock IDs)
Function
Teach-in master
finger
Teach in user finger
Identification
Delete a user finger
Delete all fingers
(reset)
Setting the security
level
Set the security
level
Set the security
level
Set the relay
switching time
(only with on-
wall/in-wall
version)
Block IDs
Unblocking IDs
Check ID
Unblock the
terminal
Operating instructions, edition 3 dated 03/01/2013
Copyright © G-U GmbH, 2012. All rights reserved.
Description
Defining administration
finger
Scan user finger,
connected with an ID
Individual deletion via
the ID
Reset to initial state
Security (High,
corresponds to 5-digit
PIN code)
Security (Medium,
corresponds to 4-digit
PIN code)
Security (Low,
corresponds to 3-digit
PIN code)
Relay switching time: 1 s
to 60 s
Blocking users
temporarily (e.g. guests)
Unblocking users
Checks whether an ID
has already been
assigned
Exit blocking mode
Procedure
Delivery condition  teach in master finger three
times
MF E ID OK
Scan user finger  MF
Scan user finger
MF D ID  OK MF
MF DA MF
MF H OK
MF M OK
MF L OK
RT  Digit(s)  OK
MF B ID  OK
MF UB  ID  OK
OK  ID  OK
Drag a taught-in finger (master or user finger)
across the sensor twice in direct succession
Page 37
C 59 501 106