Steren MUL-600 Manual De Instrucciones página 65

3. Set selector switch to μA, mA or A.
4. Press blue button to choose DC or AC. The displayed value is the effective
value of the sinusoidal wave.
5. Cut the fl ow of the desired current. Connect the red testing lead to the positive
side of the fl ow, and the black testing lead to negative side.
6. Connect the circuit. The value will be displayed in the screen.
- For safety, the interval of time if high current measuring must be at least 10
seconds between each measuring. The period of time between two measuring
must be at least 15 minutes between them.
29 29