Button Function - Steren MUL-600 Manual De Instrucciones

BUTTON FUNCTION

This table gives information about button functions:
Button Measurement
function
Any position in the
Power
rotary switch
Blue
Rotary switch in any
Range position except Hz and
capacity.
Press the button to turn on the tester, press again
to turn it off.
Switching between CA (~) and CD (---) voltage
V~
meter sounds, CD (---) is granted.
Switching between continuity, diode, resistance
and capacitance, the meter will sound, resistance
is taken for granted
Switching
μA ~
CD (---) in the range of 400 uA at 4000 uA, the
meter sounds, CD (---) is for granted
Switching between AC Amperes (~) and CD (---)
in the range of 40 mA to 400 mA, the meter will
mA ~
sounds, CD (---) is taken for granted. Facility to
disable the sleep mode
Switching between AC Amperes (~) and CD (---)
A ~
in the range from 4 A to 10 A, the meter sounds,
CD (---) is for granted.
- Press RANGE to enter the manual range mode;
the meter will beep.
Selecting manually a range causes the meter to
exit the Hold and REL modes.
- Press RANGE to step up to the selected
function, the meter will sound.
- Press and hold RANGE for 2 seconds to return
to autoranging; the meter will beep.
Operation
between AC Amperes (~) and
9 9