Steren MUL-600 Manual De Instrucciones página 40

- When the tester works with effective voltages over 60 V or 30 V RMS, you must
take special care to avoid electric shock.
- Use test probes and ranges adequate to your measurements.
- Do not store the tester under high temperature, moist, damp, explosive,
fl ammable or strong magnetic fi eld conditions. The tester's performance could
be diminished before being wet or humid.
- While using the test probes, maintain your fi nger away of the exposed metallic
parts.
- Disconnect the circuit's power and discharge the high voltage capacitors before
measure resistance, continuity, diodes, current or capacitance.
- Before measure current, check the tester's fuses and turn off the circuit before
connect the tester.
- Replace the battery when the screen's indicator appears. Low battery operation
can lead to wrong readings that could result in electric shock and injuries.
- Remove the test probes, temperature tester, RS232C interface cable and
caiman terminals before open the cover.
- When you give service to the tester, use only identical parts and models to the
original ones.
- The internal circuit must not be modifi ed, because this could lead to damage
or accident.
4 4