Grounding Instructions; Connect To A Properly Grounded Outlet Only; Operating Safety Rules And Practices; Operator Responsibility - Kärcher BR 40/25 C Ep Manual De Instrucciones

– Do not use to pick up flammable or
combustible liquids, such as gasoline, or
use in areas where they may be present.
– Connect to a properly grounded outlet
only. See Grounding Instruction.
SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it
should malfunction or breakdown, ground-
ing provides a path of least resistance for
electric current to reduce the risk of electric
shock. This appliance is equipped with a
cord having an equipment-grounding con-
ductor and a grounding plug. The plug must
be inserted into an appropriate outlet that is
properly installed and grounded in accor-
dance with all local codes and ordinances.
WARNING
Improper connection of the equipment
grounding conductor can result in a risk of
electric shock. Check with a qualified electri-
cian or service person if you are in doubt as
to whether the outlet is properly grounded.
Do not modify the plug provided with the ap-
pliance-if it will not fit the outlet, have a prop-
er outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-
volt circuit and has a grounding attachment
plug that looks like the plug illustrated in
sketchpicture A. Make sure that the
appliance is connected to an outlet having
the same configuration as the plug. No
adaptor should be used with this appliance.
4
English
CONNECT TO A PROPERLY
GROUNDED OUTLET ONLY
1 Grounded outlet
2 Grounded outlet Box
3 Grounded Pin
OPERATING SAFETY RULES
AND PRACTICES

Operator Responsibility

Save operation is in the responsibility of the
operator.
The operator shall be familiar with the oper-
ation and function of all controls and instru-
ments before undertaking to operate the
unit.
Before operating the unit, operators shall
have read and be familiar with the operator's
manual for the particular unit being operated
and they shall also abide by the safety rules
and practices in the following paragraphs.
Before operating any unit, the operator shall
be familiar with unusual operating conditions
which may require additional safety precau-
tions or special operating instructions.
General
Before starting to operate the unit be in op-
erating position.
Do not start or operate the unit, any of its
functions or attachments, from any place
other than from the designated operators
position.
Before leaving the operator's position:
A bring the unit to a complete stop;