IMPORTANT INFORMATION
Please Read Before Use
Huang Vein Holder
Description
The Huang Vein Holder, tapering tip, catalog
no. 21-8011, holds vein during anastomosis in
the aorta-to-coronary bypass graft procedure.
Tip width is 1 mm, maximum diameter is
(10 mm); vein holder length is 7 in. (178 mm).
Reprocessing Instructions
These reprocessing instructions apply to:
These instructions do not apply to single-
use devices.
These reprocessing instructions have been
validated as being capable of preparing
reusable Symmetry Sur
reuse. It is the responsibility of the reprocessor
to ensure that the reprocessing is actually
performed using appropriate equipment,
materials, and personnel to achieve the desired
result. This normally requires validation and
routine monitoring of the process. Any deviation
by the reprocessor from these instructions
should be evaluated for effectiveness and
potential adverse consequences.
Please telephone Symmetry
Service at 1 800 251 3000 or fax: 1 615 964 5566
if you need additional assistance.
Warnings for Reprocessing
•
210-8011-85
210-8011-85-H-INS.indd 2
ENGLISH
• Reusable surgical instruments
supplied by Symmetry Sur
• Instruments intended for reprocessing
in a health care facility setting
Follow the instructions and warnings
issued by the suppliers of any
cleaning and disinfection agents
and equipment used.
-K
gical
®
gical instruments for
Surgical Customer
®
2
3
⁄
in.
8
®
10/16/2012 6:41:19 PM