Electrode Connections - Tesmed TE 780 PLUS Manual De Instrucciones

Electrode connections

FOR EASY USE, ALWAYS CONNECT THE GREEN CABLE TO TESMED CHANNEL A
AND THE ORANGE CABLE TO CHANNEL B (Figure 1). THEN CONNECT THE
PLUGS, BEARING IN MIND THE POLARITY, RED/BLACK (Figure 2).
Figure 1
CHANNEL
B
PLACE THE ELECTRODES (AS IN THE FIGURE IN THE INSTRUCTIONS MANUAL)
SHOWING THE CHOSEN TREATMENT AND CONNECT THE PLUGS.
EXAMPLE: RED PLUG ON THE CANALE A CABLE (GREEN) SHOULD BE CON-
NECTED TO AN ELECTRODE MARKED WITH A RED RECT ANGLE, PLACED AS
SHOWN IN THE RELEVANT FIGURE FOR THE CHOSEN TREATMENT. REPEAT THE
SAME OPERATION WITH ALL THE OTHER PLUGS.
USE OF INDIVIDUAL TYPES OF MASSAGE: TESMED LETS YOU PERFORM
INDIVIDUAL MASSAGES AT WILL (the timer is programmed for 20 minutes):
TAPPING (I) = LIGHT PERCUSSIVE TAPPING MASSAGE
TAPPING (II) = QUICK TAPPING MASSAGE
KNEADING = KNEADING MASSAGE
PRESS = MASSAGE WITH PRESSURE
VIBRATION = MASSAGE WITH VIBRATION
MORE POTENCY : FOR MORE DEMANDING AND EXPER T PERSONS, 2 ELEC-
TRODES CAN BE USED PER CHANNEL TO DOUBLE THE POTENCY IN THE ZONE
WHERE THE ELECTRODE IS APPLIED. IN THIS CASE, WE RECOMMENDED
USING ONE RED PLUG AND ONE BLACK ONE PER CHANNEL, POSITIVE AND
NEGATIVE, COVERING THE OTHER TWO WITH THE COVERS INCLUDED IN THE
KIT. THIS SOLUTION IS NOT RECOMMENDABLE FOR INEXPER T USERS. WE
RECOMMEND INCREASING THE INTENSITY WITH CAUTION, EVEN IF YOU ARE
AN EXPERT, AS THE INTENSITY IS ALWAYS DOUBLED WITH TWO ELECTRODES.
TIMER: ALL PROGRAMS AND ALL MODES HA VE A FIXED MAXIMUM FUNC-
TIONING TIME OF 20 MINUTES. THE SYSTEM AUTOMA TICALLY RETURNS TO
"0" AFTER 20 MINUTES AND, THEN AFTER A FUR
AUTOMATICALLY SWITCH OFF . IF YOU ST ART WITH ANY PROGRAM BELONG-
ING TO CHANNEL A AND THEN, AFTER 10 MINUTES, CHANNEL B, IS ENABLED
BY ANY PROGRAM, THE TIMERS CONTROLLING THE TWO CHANNELS WILL
WORK INDEPENDENTLY AND SO, ONCE THE 20 MINUTES ARE UP FOR
CHANNEL
A
19
Figure 2
THER 4 MINUTES, IT WILL