Dometic FreshLight Instrucciones De Montaje página 34

Installation
Attaching the roof air conditioner
See fig. a
➤ Mount the fastening bracket with the two long fastening screws.
Start with the two fastening brackets on the outside.
See fig. b
Caution – risk of damage
A
Tighten to the specified torque.
➤ Tighten the screws using a torque spanner and a fastening torque of
2.5 Nm.
Electrical connection
See fig. c
230 Vw cable
➤ Connect the roof air conditioner with the 230 Vw voltage supply.
Connect the cables (1) to a cable connector (2).
Remote light switch (not included in the scope of delivery)
You can connect the lighting to a remote light switch. This enables you to
switch on the lighting remotely.
To do this, proceed as follows:
➤ Disconnect the 2-pin plug (3) from the socket on the circuit board of the
air outlet unit.
➤ Connect the two cables of the remote light switch to the 2-pin plug (3).
➤ Insert the 2-pin plug (3) into socket on the circuit board.
32
Dometic FreshLight
EN