Tabla de contenido
STEP 1 - ELECTRICAL CONNECTION
Refer to the Dimmer recommendations on page 2.
1. The required outlet should be located as shown. (see figure 1)
2. Make electrical connections as shown. (see figure 2)
1
Outlet
Location
Up to 40"
(1016 mm)
Note: Measurements shown are based on an assembled mirror and frame.
2
20A GFI Circuit
*Make proper connections according to the Dimmer Manufacturer's Instructions. For on/off
(no dimmer) operation a standard wall switch may be substituted in place of the dimmer.
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Slim Museum
18-1/8"
Chamfer Museum
19"
(483 mm)
C
L
Black (L)
White (N)
Ground (G)
Light Switch
and/or
Dimmer*
Over 40"
(1016 mm)
(460 mm)
Black (L1)
Red (L2)
White (N)
Defogger
Ground (G)
if equipped
4
Outlet
Location
C
L
Light circuit
connection
Note: Outlet "line" connection for
top and bottom receptacles must
be electrically isolated from each
other. Receptacles will be controlled
independently.
Defogger
circuit
connection
Part no. 209-1308-rC rev. 08/29/19
Slim Museum
20-5/8"
(524 mm)
Chamfer Museum
21-1/2"
(546 mm)
Sculpt
Tabla de contenido
