Tabla de contenido
DIMMER RECOMMENDATIONS
Robern recommends the Maestro® C•L® Dimmer from LUTRON®, Model # MACL-153M.
http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf
Other LED control dimmers may operate with this product but have not been tested or verified. It's recommended that the dimmer be
within reach of your mirror so you can adjust the brightness.
For on/off (no dimmer) operation a standard wall switch may be substituted in place of the dimmer.
TOOLS NEEDED
1/4" 3/32"
PARTS
[216-1166]*
Mounting Hardware Bag
(5) Wall Anchor
(2) Screw
Mirror
Frame
(5) Screw
(2) Cleat
(1) Wall Bracket
(2) 1" Loop
(2) 5" Loop
(2) 3" Locking
Adhesive Strip
Adhesive Strip
Adhesive Strip
Reflector
†
* Some hardware may not be used in all installations.
For framed mirror sizes over 45" in width, two hardware bags are included.
Title 24 models only
†
Part no. 209-1308-rC rev. 08/29/19
Sculpt
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
2
Installation instructions
Tabla de contenido
