Fulgor Milano CREATIVE CCSO 4511 TC Manual Del Usario página 57

Cooking
time
The oven goes to standby mode, turning off the oven light.
The control automatically turns the oven on at 11:00 (13:00-2:00) and turns it off at
13:00. The roast will be ready when you return!
Programming the timer: minute-counter
The minute-counter is a function of the timer that is independent from the operation of the oven, i.e., it
does not stop cooking or turn off the oven but functions as an alarm.
You can set it at any time, such as to remind you when to check cooking on the burners, in addition to
the oven, or for other kitchen tasks.
It is even available when the oven is off and, in this case, just touch the timer function symbol one time.
But, if you are using it with the oven on, you must touch the time function symbol three times:
Programming the timer: cancelling the program
To cancel a program, you must set the previously assigned value to zero or turn off the oven.
Then set the cooking time, which we
assume to be two hours.
Now, set the end-of-cooking time: the control
normally adds the cooking time to the current time,
so it proposes an end-of-cooking time, which in our
case would be 10:30 (8:30+2:00).
Change the end-of-cooking time to what
you want, in our example 13:00.
The separator dots flash to indicate that you can set
the time.
Touch the "+" and "-" symbols to set the minutes
and the countdown starts now. After the indicated
time passes, the over will beep and the dedicated
symbol will flash: press any button to stop the beep.
57
GB