YASKAWA V1000 Serie Guia De Inicio Rapido página 55

Monitor Description
U1-07
DC Bus Voltage (Vdc)
U1-08
Output Power (kW)
U1-09
Torque Reference (% of motor rated torque)
Input Terminal Status
Input Terminal Status
: ON
1: Digital input 1
Reserved
(terminal S1 enabled)
1: Digital input 2
U1-10
(terminal S2 enabled)
1: Digital input 3
(terminal S3 enabled)
1: Digital input 4
(terminal S4 enabled)
1: Digital input 5
(terminal S5 enabled)
1: Digital input6
(terminal S6 enabled)
Output Terminal Status
Output Terminal Status
: ON
1: Relay Output
Reserved
U1-11 (terminal MA-MC closed
1: Open Collector Output 1
(terminal P1) enabled
1: Open collector Output 2
(terminal P2) enabled
Drive Status
1: During run
1: During zero-speed
1: During REV
U1-12
1: During fault reset
signal input
1: During speed agree
1: Drive ready
1: During alarm detection
1: During fault detection
U1-13
Terminal A1 input level
U1-14
Terminal A2 input level
U1-16
Soft Starter Output (freq after accel/decel ramps)
U1-18
OPE Fault Parameter
U1-24
Pulse Input frequency
Monitor Description
Fault Trace
U2-01
Current Fault
U2-02
Previous Fault
U2-03
Frequency Reference at Previous Fault
U2-04
Output Frequency at Previous Fault
U2-05
Output Current at Previous Fault
U2-06
Motor Speed at Previous Fault
U2-07
Output Voltage at Previous Fault
U2-08
DC Bus Voltage at Previous Fault
U2-09
Output Power at Previous Fault
U2-10
Torque Reference at Previous Fault
U2-11
Input Terminal Status at Previous Fault
U2-12
Output Terminal Status at Previous Fault
U2-13
Drive Operation Status at Previous Fault
U2-14
Cumulative Operation Time at Previous Fault
U2-15
Soft-Starter Speed Reference at Previous Fault
U2-16
Motor q-Axis Current at Previous Fault
U2-17
Motor d-Axis Current at Previous Fault
Fault History
: OFF
: OFF
MB-MC open)
Monitor
U3-01
Lists the most recent fault that occurred through the fourth
to
most recent fault.
U3-04
U3-05
Accumulated operation time at the most recent fault through
to
the fourth most recent fault.
U3-08
U3-09
Lists the fifth most recent fault that occurred through the
to
tenth most recent fault.
U3-14
U3-15
Accumulated operation time at fifth most recent fault
to
through the tenth most recent fault.
U3-20
*The following faults are not recorded in the error log:
CPF00, 01, 02, 03, UV1, and UV2.
DI/DO Sel
Digital Input Function Selections
3
Multi-step speed reference 1
4
Multi-step speed reference 2
5
Multi-step speed reference 3
Jog frequency command (higher priority than multi-step
6
speed reference)
7
Accel/decel time selection 1
F
Not used (Set when a terminal is not used)
14
Fault reset (Reset when turned ON)
External fault; Input mode: N.O. contact / N.C. contact,
20 to 2F
Detection mode: Normal/during operation
Digital Output Function Selections
During Run (ON: run command is ON or voltage is being
0
output)
1
Zero Speed
2
Speed Agree
6
Drive Ready
E
Fault
F
Not used
10
Minor fault (Alarm) (ON: Alarm displayed)
25
6 Parameter Table
Description
Description