To Adjust The Parallelism Of The Cutting Deck; Fuel System Overview; To Replace The Fuel Filters; To Replace The Paper Filter In The Main Filter - Husqvarna P 520DX Manual De Usuario

Ocultar thumbs Ver también para P 520DX:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

To adjust the parallelism of the cutting
deck
1. Turn the track rod to extend it or make it shorter.
Extend the track rod to lift the rear edge of the
cutting deck. Make the track rod shorter to lower the
rear edge of the cutting deck.

Fuel system overview

1. Diesel fuel tank
2. Electric fuel gauge
3. Prefilter
4. Fuel filter
5. Fuel return hose
6. Fuel hose
36
Note:
For Combi 132 X, Combi 155 X, adjust the
track rods on the 2 sides.
2. Tighten the nuts on the track rod.
3. Do a check of the parallelism. Refer to
check of the parallelism of the cutting deck on page
35 .
5
2
1

To replace the fuel filters

To replace the paper filter in the main filter

1. Open the engine cover. Refer to
cover on page 32 .
2. Remove the air filter. Refer to
the air filter on page 37 .
3. Close the fuel valve (A).
To do a
4
6
3
To open the engine
To clean and replace
1593 - 002 - 22.12.2020
Tabla de contenido
loading

Este manual también es adecuado para:

P 525dxP 525dx cabin

Tabla de contenido