�������������������������������������������������������
�����������������������������������������������������������
���������������������������������������������������������
7.3 PONYBENCH BTPLUS PNEUMATIC LAY-OUT
������� ���� ������� ���������� ���� ������ ������ ������ ��� ���
������� ������������������������� ���� ������ �������� ���
•
OPERATION
������� �� ������ ����������� �������������� ��� �������������
When the descent button is pressed on the control console, compressed air from the regulator-lubricator (not supplied)
located at the inlet of the supply line (P), is sent through the 3-way valve (EV1) to the cylinder (CBS) that releases
�������� ��������������
the anti-fall safety hook. When the control is released, the valve connects the air duct to the outlet, thus enabling
�����������������������������������������������������������
automatic insertion of the safety hook by means of the return spring. The regulator – lubricator unit is not supplied by the
������������������������������������������������������������
Manufacturer as it is an integral part of the workshop compressed air distribution system.
��������� ������ ������ ���������������� ��������� ����������
When the selector/valve (S3), also on the control console, is turned clockwise, compressed air, received from the feed
line, is allowed to reach the jack rod chambers (CA-CB-CD-CE) (passing through a fl ow control valve (VFR), and thus
�����������������������������������������������������������
opening the pad support arms. On the contrary, if the selector/valve (S3) is turned anti-clockwise, the jacks (CA-CB-CD-
��������������������������������������������������������
CE) are fed from the other inlet, thus closing the pad support arms.
���� ������������ ���������� ��� ��� ������ ��� ������ ������� ��
The regulator – lubricator unit is not supplied by the Manufacturer as it is an integral part of the workshop compressed
������ ����� ��� ����������� �� ����������� �������������� ����
air distribution system.
����� ����������� ����� ��� ��������� ���� ���������� ��������
���������� �� �������������� ���� ������ �������� ���� �����������
�������������������������������������������������������������
���������
���������
Key
���������
CBS
Safety lock cylinder
S3
Arm control cylinder
-Position 1 Close arms
-Position 0 Neutral
����� ����������� ���������
-Position 2 Open arms
VRF
Flow control valve.
�� �������� ���������
EV1
Solenoid-valve controlling safety lock cylinder
CA-CB
Arm motion cylinders
��������������������������
CD-CE
Arm motion cylinders
P
Supply line
��������������
3)
Pull bar block release cylinders
4)
Manual control 3-way valve for pull arm block release cylinder
��������������������������
5)
Pneumatic-electric transducer controlling the pull arm block cylinder.
��������������������������
����������� �������� ��������� ����������� ���������
��� ��������� ���������� ���������
��������������
����������������������������������
������� ��������� ����������� ������������
�������� ��� ������������� ���������� ������
�����������������������������������������������������
����������������������������������������������������
�������� ���� ���������� �� ����������� ����� ��� ����
�����������������������������������������������������
������������� �������
����� ���� ��������������� ������ ����� ��� ���� �������� �
��������������������������������������������������
�����������������������������������������������
�������������������������������������������������
�������������������������������������������������������
�������������� ���� ���� ����� ���� ������ ������� ����
�������� �����
�������������������������������������������������������
�������������������������������������������������������
���
���
��������������������
�� ��������������������
���������������������������
����������������������
�������������������������
���
�������������������
���
��������������� ������������ ������� ����� ������
����������� ��������������������
�
������� ����
81
�����������������������������������
GB