Inserting The Safety Filter Bag (For Asbestos Applications); Removing/Changing The Safety Filter Bag (For Asbestos Applications); Operation Without Use Of The Electric Tool Power Outlet; Operation With Use Of The Power Outlet On The Appliance - Hilti VC 40H-X Manual De Instrucciones

6.3

Inserting the safety filter bag (for asbestos applications)

It is mandatory to use the safety filter bag when working with asbestos.
Comply with the special instructions for use when working with asbestos.
1. Open the two catches.
2. Lift the vacuum cleaner top section away from the waste material container.
3. Insert the safety filter bag.
4. Draw the safety filter bag over the container.
5. Insert the adapter of the safety filter bag into the holder.
6. Fit the vacuum cleaner top section onto the waste material container and close the two catches.
7. Check to ensure that the vacuum cleaner top section is fitted correctly and secured.
6.4

Removing/changing the safety filter bag (for asbestos applications)

1. Release the vacuum cleaner top section.
2. Pull the safety filter bag up at the flange.
3. Seal the intake of the safety filter bag.
4. Draw the safety filter bag up and close off the vent hole with the adhesive tab.
5. Use the cable tie affixed to the safety filter bag to close it securely.
➥ Dispose of the dust-tight bag in accordance with the applicable regulations.
6. Clean the waste material container with a cloth.
7 Operation
WARNING
Risk of injury. Damage to the filter system may allow harmful dust (health hazard) to escape.
▶ In an emergency (e.g. filter ruptured), switch the vacuum cleaner off, unplug the supply cord from the
power outlet and have the vacuum cleaner checked by a trained and qualified person before further use.
DANGER
Risk of injury. Class H, Class L and Class M vacuum cleaners contain dust that is hazardous to the health.
▶ Emptying and maintenance, including disposal of the dust collection container, may be carried out only
by trained and qualified specialists. Wear the appropriate protective equipment.
▶ Before removing the vacuum cleaner from an area contaminated with hazardous substances, use the
vacuum cleaner to clean off its own exterior, wipe it clean or place it in a sealed bag or container. As
all parts of the appliance must be considered to be contaminated, suitable measures to avoid spreading
the dust must be implemented before these parts are removed from the hazardous area.
▶ Never operate the vacuum cleaner without the complete filter system fitted.
CAUTION
Risk of injury presented by the appliance running away out of control. The vacuum cleaner may run
away out of control if the wheel brakes are not engaged.
▶ Engage the wheel brakes so that the vacuum cleaner stands securely.
7.1

Operation without use of the electric tool power outlet

1. Check that the switch on the appliance is in the "OFF" position off before plugging the supply cord into
a power outlet.
2. Plug the vacuum cleaner's supply cord into the power outlet.
3. Turn the control switch to the "ON" position.
7.2

Operation with use of the power outlet on the appliance

The power outlet on the appliance is to be used only for powering electric tools directly from the
vacuum cleaner.
The operating instructions and safety instructions for the electric tool plugged into the power outlet on
the vacuum cleaner must be observed.
*2243106*
Printed: 24.07.2019 | Doc-Nr: PUB / 5505414 / 000 / 00
2243106 English 23