Tabla de contenido
Idiomas disponibles
Idiomas disponibles
the dust bag (e.g. pointed or sharp ob-
jects).
5.8 Thermal
Do not pick up hot materials (glowing cigar-
ettes, hot ash, etc.).
en
5.9 Personal protective equipment
a) The user and any other persons in the
vicinity must wear suitable eye protec-
6 Before use
CAUTION
The mains voltage must comply with the
specification given on the type identification
plate. Ensure that the appliance is discon-
nected from the electric supply.
DANGER
Connect the appliance only to properly
earthed/grounded power sources.
CAUTION
Always check to ensure that the vacuum
cleaner is standing securely. Engage the
castor brakes.
CAUTION
When fitting the top section of the vacuum
cleaner, take care to avoid pinching your
fingers or damaging the supply cord.
6.1 Use of extension cords and
generators or transformers
See section "Description / use of extension
cords".
24
tion, a hard hat, ear protection, protect-
ive gloves and safety footwear while the
appliance is in use.
b) When working with mineral drilling slurry,
wear protective clothing and avoid skin
contact with the slurry (pH>9: caustic).
6.2 Operating the appliance for the first
time
1. Open the two catches.
2. Lift the vacuum cleaner top section away
from the waste material container.
3. Remove the accessories and packaging
from the waste material container.
NOTE If dry dust is to be collected, fit the
dust bag into the waste material container
in accordance with the instructions.
4. Fit the vacuum cleaner top section onto
the waste material container.
5. Close the two catches.
6. Check to ensure that the vacuum cleaner
top section is fitted correctly and secured.
7. Connect the suction hose to the appliance.
6.2.1 Fitting a dust bag for collecting dry
dust 2
1. Open the two catches.
2. Lift the vacuum cleaner top section away
from the waste material container.
3. Insert the new dust bag in the waste ma-
terial container.
4. Press the dust bag sleeve firmly onto the
hose socket.
Capítulos
Tabla de contenido
