Description Of The Controls - Diamond DBT102/L Manual De Instrucciones

5.2.

Description of the Controls

Below is a brief description of the functions carried
out by the keys on the control panel.
GB
Temperature Blast chilling Key
By pressing the key with the machine at a
standstill, it allows to select a temperature blast
chilling cycle (+90°C+3°C).
Time Blast chilling Key
By pressing the key with the machine at a
standstill, it allows to select a time blast chilling
cycle.
Time Blast chilling Key
By pressing the key with the machine at a
standstill allows to select a temperature shock
freezing cycle (+90°C-18°C).
Time Shock freezing Key
By pressing the key with the machine at a
standstill, it allows to select a time shock freezing
cycle.
Time increase and decrease keys
When the time blast chilling and/or shock freezing
mode is selected, these buttons allow to set the
cycle duration.
ENGLISH
Cycle start key
Once a cycle has been selected, press this button
to start the cycle.
If it is pressed during functioning the appliance
stops; the setting of the previous cycle selected
remains, which can be started immediately.
By pressing this button for at least 5 seconds the
machine passes to the stand-by mode. Repeat
the procedure to reactivate the board.
DEFROST key
When the machine is off a manual defrosting
cycle can be started.
If the key is pressed again, the defrosting in
progress can be stopped.
Display (DY1): symbols description
 : shock-freezing cycle on
 : blast-chilling cycle on
 : preserving cycle on
 : temperature cycle on
 : time cycle on
 : power supply on – always on even with
machine in stand-by
8