Features Plate; Safety - Diamond DBT102/L Manual De Instrucciones

3.5.

Features Plate

The identification plate shown is applied directly
onto the appliance. It states the references and all
indications indispensable for working in safety.
1) Appliance code
2) Description of the appliance
3) Serial number
4) Power supply voltage and frequency
5) Electrical absorption
6) Climatic class
7) Type and Amount of refrigerant gas
8) WEEE symbol
4.

SAFETY


It is recommended to carefully read the
instructions and warnings contained in this
manual before using
information contained
fundamental for the safety of use and for machine
maintenance.
!
Keep this manual carefully so that it can be
consulted when necessary.

The electric plant has been designed in
compliance with the
Standard.
,
Specific adhesives highlight the presence of
mains voltage in the proximity of areas (however
protected) with risks of an electrical nature.
!
Before the connection, ensure the presence
of an omnipolar switch with minimum contacts
opening equal to 3 mm in the mains power supply
upstream from the appliance (requested for
appliances supplied without plug to connect to the
fixed plant).
the appliance. The
in the manual is
IEC EN 60335-2-24
CODICE
CODE /KODE
MODELLO
MODEL/MODELL
MATRICOLA
SERIAL No/SERIEN NR.
TENSIONE
TENSION/SPANNUNG
INPUT
LEISTUNGSAUFNHAME
POTENZA
CLIMATIC CLASS
KLIMAKLASSE
CLASSE CLIMATICA
REFRIGERANT
KUEHLMITTEL
REFRIGERANTE
In the design and construction phase, the
manufacturer has paid particular attention to the
aspects that can cause risks to safety and health
of persons that interact with the appliance.
Carefully read the instructions stated in the
manual supplied and those applied directly to the
machine, and particularly respect those regarding
safety.
Do not tamper or eliminate the installed safety
devices. Failure to comply with this requisite can
lead to serious risks for personal health and
safety.
It is recommended to simulate some test
manoeuvres in order to identify the controls, in
particular those relative to switch-on and switch-
off and their main functions.
The appliance is only destined for the use for
which it has been designed; any other use must
be considered improper.

The manufacturer declines all liability for any
damage to objects or injury to persons owing to
improper or incorrect use.
5
ENGLISH
1
2
3
4
5
6
7
8
GB