Functional Description; Battery Pack; Capacity Display; Settings - Festool TSC 55 KEB Manual De Instrucciones Original

English
Cordless plunge-cut saw
Cutting depth at 0°
Cutting depth at 45°
Saw blade dimensions
Weight as per EPTA pro­
cedure 01:2014 (with 2 x
BP 18 Li 5.2 AS battery
pack)
Weight excl. battery pack
5

functional description

[1-1] Handles
[1-2]
Rotary knobs for adjusting the angle
[1-3] Angle scale
[1-4]
Unlocking devices for 1° to 47° un­
dercuts
[1-5] Lever for changing the tool
[1-6]
Safety lock
[1-7] On/off switch
[1-8]
extractor connector
[1-9] Button for releasing the battery pack
[1-10] Adjustable jaws
[1-11] Capacity indicator button on battery
pack
[1-12] Speed control
[1-13] Battery pack capacity indicator
[1-14] Kickback stop function status LED
[1-15] Kickback stop function OFF button
[1-16] Cutting depth adjusting screw for re­
conditioned saw blades
[1-17] Cutting depth stop
[1-18] Gauge marker
[1-19] Viewing window/chip guard
[1-20] Splinter guard
[1-21] Feeler wedge
[1-22] Protective lid
[1-23] Split scale for the cutting depth stop
(with/without a guide rail)
The illustrations specified are located at the be­
ginning and end of the operating instructions.
24
TSC 55 KEB
0–55 mm
0–43 mm
160 x 1.8 x 20 mm
5.3 kg
3.9 kg
Accessories shown or described are not always
included in the scope of delivery.
6

Battery pack

Before using the battery pack, check that the
battery interface is clean. Any contamination of
the battery interface may impair correct contact
and lead to the contacts being damaged.
A faulty contact may result in the machine over­
heating or being damaged.
[2A]
Remove the battery pack.
[2B] Insert the battery pack – until it
clicks into place.
Please note: The machine can only be op­
erated under the following conditions [2C]:
Both battery packs are used. Maximum power
with two battery packs (36 V).
Only the lower battery pack is used. Less power
with one battery pack (18 V).
6.1

Capacity display

The capacity display [1-13] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-11] is pressed:
Recommendation: Charge the battery pack
*
before any further use.
Further information about the charger and
battery pack with capacity indicator can be
found in the corresponding operating
manual.
7

Settings

WARNING
Risk of injury
► Remove the battery pack from the power
tool before performing any work on the
power tool.
70‑100%
40‑70%
15‑40%
< 15% *