Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Precautions
1. The induction hob must be installed by licensed electricians or qualified
technicians. Please never do the operation on your own.
2. The induction hob cannot be installed directly over a dishwasher,
refrigerator, freezer, washing machine or dryer, as moisture can damage
the electronic components of the induction hob.
3. The induction hob will be installed so that better heat radiation can be
guaranteed to improve its reliability.
4. The wall and the induced heating zone on the table top must withstand the
heat.
5. To avoid any damage, the hob must be heat resistant.
CONNECTION OF THE INDUCTION HOB TO THE ELECTRICITY SOCKET.
Before connecting the induction hob to the mains, check that:
1. The electrical installation where the induction hob is to be connected must
be suitable for the power consumed by the induction hob.
2. The voltage must correspond to the nominal value specified in the
characteristics described in this manual.
To connect the induction hob to the mains socket, you must not use adapters,
reducers or branches, as these devices can become hot and cause a fire.
The power cable of the induction hob must not touch any part or area where it
acquires high temperatures and must be positioned so that the temperature will
not exceed 75˚C at any point.
Check with a licensed and qualified electrician for proper electrical installation.
Any modification to the electrical installation must only be carried out by a
licensed electrician.
The electrical connection of the induction hob must be carried out in
accordance with current regulations and protected by a single-pole
magnetothermic or automatic switch.
If the cable is damaged, to be substituted or replaced, the operation must be
carried out by an Official Mx Onda Technical Service.
The authorized installer must ensure that the correct electrical connection
has been made and that it complies with safety regulations.
The cable must not be bent or compressed.
The cable should be checked regularly and replaced only by authorized
technicians.
The manufacturer is not responsible for any accident resulting from the use
of an appliance that is not grounded or from faulty grounding continuity.
If the device has an electrical outlet, it must be installed so that the
electrical outlet is accessible.
21
Tabla de contenido
