Mx Onda MX-PI2612 Manual De Usuario E Instalacion página 66

When finishing the installation of the induction hob, make sure that ...
The power cord is not accessible through drawer or drawer doors.
There is adequate flow of fresh air from outside the cabinet to the base of
the counter.
If the induction hob is installed over a drawer or closet space, a thermal
protection barrier is installed under the base of the hob.
The isolating switch or circuit breaker is easily accessible by the user.
Before attaching the fixing brackets.
The unit should be placed on a stable and smooth surface (use the packaging).
Do not apply force to controls that protrude from the plate.
Attaching the fixing brackets
To fix the induction hob on the hob, you must first place the fixing brackets, use
the supplied screws (do not use other screws as they could damage the inside
of the induction hob).
A B
Screw Support
Crystal
Junta
Fixing bracket
CristalJunta
Screw
Plate base
C
Screw hole Base
20
D
Worktop