Function And Response Table - Petsafe PCF-1000-20 Manual De Adiestramiento Y Funcionamiento

To set Correction Level
Read all the steps before attempting to set the Correction Level.
1. Place the magnet on the Correction Level Key Ring next to the Magnet Key Dot
on the Receiver Collar. The Receiver Indicator Light will come on.
2. Remove the magnet from the Key Dot. The number of fl ashes indicates the
Correction Level.
3. To increase the Correction Level, place the magnet next to the Magnet Key Dot
within 5 seconds of performing the above step. The number of fl ashes indicates
the new Correction Level.
The Correction Levels increase in strength from 1 to 5. Activating the Magnet
Key Dot while the Receiver Collar is on level 5 will cause the Receiver Collar to
revert to level 1. Refer to the Function and Response Table below to choose the
Correction Level that best fi ts your cat.
The Receiver Collar is equipped to automatically increase the level of Static
Correction the longer your cat remains in the Static Correction Zone if the collar is
set at level 2 or above.
The Receiver Indicator Light also acts as a low battery indicator, fl ashing every 4 to 5 seconds when battery
replacement is required.

Function and Response Table

Indicator Light Correction Level Receiver Collar Function
Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
Flashes once every
4 to 5 seconds
Note: Begin training with Correction Level 2 and only increase if your cat does not respond to the Static Correction.
1 No Static Correction, Beep Only
2 Low Static Correction
3 Medium Static Correction
4 Medium-High Static Correction
5 High Static Correction
Low Battery
www.petsafe.net
Temperament of cat
Timid
Timid or Average
Average or High Energy
High Energy
(Bottom)
(Top)
9