Primary Input Connections - ESAB MTS 3500i Manual De Instrucciones

SEctIoN 2
WARNINg
2.4

Primary Input connections

The MTS 3500i consoles are equipped with approximately 10 ft. (3.0 m) of 4-conductor input power cable for 3
phase connection. If single-phase connection is desired, cap the unused wire on the input power cable per chart
below.
ELEctRIc SHocK cAN KILL! PREcAutIoNARY MEASuRES SHouLD
BE tAKEN to PRoVIDE MAxIMuM PRotEctIoN AgAINSt ELEctRI-
cAL SHocK. BE SuRE tHAt ALL PoWER IS oFF BY oPENINg tHE LINE
(WALL) DIScoNNEct SWItcH AND BY uNPLuggINg tHE PoWER
coRD to tHE uNIt WHEN coNNEctIoNS ARE MADE INSIDE oF tHE
PoWER SouRcE.
StANDARD uNItS
(NoN-cE)
PHASE 3 1
L1 White White
L2 Black Black
L3 Red
GND Green Green
PRIMARY INPUT
POWER CABLE
Figure 2-2. Input connections
cE uNItS
(EuRoPE)
PHASE 3
L1 Brown
L2 Black
- L3 Gray
GND Green/Yel
WARNINg
INSuLAtE uNuSED PoWER coRD
coNDuctoR WHEN coNNEctINg
FoR SINgLE PHASE.
14
INStALLAtIoN
1
Brown
-
Gray
Green/Yel
CUSTOMER FUSED LINE DISCONNECT SWITCH
(See Table 2-1)