Approvals; Testing Standards - Mettler Toledo IND560x Manual De Instalación

2

Approvals

This chapter covers


Testing Standards


Understanding Approval
Parameters

U.S. Approvals

European Approvals

Canadian Approvals

IECEx Approval

Approval Entity Values
2.1. Testing Standards
Table 2-1 shows the list of standards to which the IND560x terminal has been tested. The date of
the standard is also included.
ANSI/IEC 60529:2004 Degrees of Protection Provided by Enclosures (IP Code)
ANSI/NEMA 250:1991 Enclosures for Electrical Equipment (1000 Volts Maximum)
CSA-C22.2 No. 142
CSA-C22.2 No.157
CAN/CSA-C22.2 No.
64061929 | 11 | 07/2017
This chapter provides approval information for the IND560x terminal panel-mount and
harsh enclosures. Please read this chapter thoroughly before beginning installation.
Appendix A at the end of this manual contains the approval certificates and control
drawings for the approvals. These documents should also be reviewed before beginning the installation.
Standard
Electrical Equipment for Use in Hazardous (Classified)
Class 3600
Locations, General Requirements
Intrinsically Safe Apparatus and Associated Apparatus for Use in
Class 3610 Class I, II, & III, Division 1 and Class I Zone 0 & 1 Hazardous
(Classified) Locations
Electrical and Electronic Test, Measuring and Process Control
Class 3810
Equipment
Process Control Equipment
Intrinsically safe and non-Incendive equipment for use in
hazardous locations
CSA-C22.2 No.
Degrees of Protection Provided by Enclosures (IP Code)
60529:2005
Safety requirements for electrical equipment for measurement,
61010-1:2004 control, and laboratory use - Part 1: General requirements
Table 2-1: Testing Standards
Description
METTLER TOLEDO IND560x Installation Manual
Date
2011
2010
2005
2004
1991
1990
1992 (R2006)
2005
2004
2-1