Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch TCE 4335 Manual Del Usuario

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal Probability of
word occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION
Possible dangerous
situation
Below you will see an example of the "Live parts"
warning notice by way of example, with the signal word
DANGER:
DANGER – Exposure of live parts on open-
ing the TCE 4335!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
€
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
€
Disconnect TCE 4335 from the mains be-
fore opening.
1.1.2

Symbols in this documentation

Sym- Designation Explanation
bol
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step op- Instruction consisting of several steps
2. eration
One-step oper- Instruction consisting of one step.
e
ation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
Robert Bosch GmbH
Severity of danger
if instructions not
observed
Death or severe
injury
Death or severe
injury
Minor
injury
Symbols used | TCE 4335 | 23
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible!
Mounting tool
Danger of crushing the fingers between the
mounting tool and the rim.
Mains tension
Danger of electrical shock when touching the
parts of the electrical system.
Bead breaker
Danger of crushing the limbs between the
bead breaker and the tire.
Column tilting
Danger of crushing in the area close to the
tilting column.
en
|
1 695 106 642 2010-12-22