Voip Configurations - Intelbras VOIPER Guia De Instalacion

Static IP (fixed)
1. Press the
Network and press ENTER;
1. Press Config.WAN and ENTER;
1. Select Type of IP and press ENTER;
1. Select Static IP and press ENTER;
1. Select Config.Static and press ENTER to set up the IP Address, the Sub-
-network mask, and the Gateway default.
PPPoE
1. Press the
Network and press ENTER;
2. Select Config.WAN and press ENTER;
3. Select Type of IP and press ENTER;
4. Select PPPoE and press ENTER to confirm;
5. Select Config. PPPoE and press ENTER to set up user and password (use
the table of characters under the item Calendar);
6. Press the
7. Select Config. LAN and press ENTER;
8. Select Router and press ENTER.
Obs.: to confirm alterations, it is necessary to reboot the equipment or turn
it off and on again.
After confirming the alterations, access to the Internet is possible. Proceed
with next step of the configuration.

VoIP configurations

After setting up the network, it is necessary to have the information from your
VoIP service provider in order to make calls. This device allows you to register
up to 3 different operator accounts. The data for each operator are inputted
in the Voiper/Voiper PoE configuration page through your Internet browser
(for example, Internet Explorer).
In order to access the webpage, use the IP number assigned to the Voiper/
Voiper PoE.
38
key and, using the
key and, using the
key twice to return;
/ navigation keys, select
/ navigation keys, select