Remote Operation; Sitrans Communications: Hart; Service And Maintenance - Siemens SITRANS LR250 Instrucciones De Servicio Resumidas

High Calibration Point
Distance from Sensor reference point to High Calibration Point: usually process full level. (See Operation for an illustration.)
Values Range: 0.00 to 20.00 m
Wizard complete
Options BACK, CANCEL, FINISH (Display returns to 1.1 Quick Start Wiz menu when Quick Start is
successfully completed.)
Press DOWN arrow (Finish). Then press LEFT arrow
operate.
7

Remote operation

7.1

SITRANS Communications: HART

● You will need the full operating instructions to acquire the list of applicable parameters.
● We recommend that you use SIMATIC Process Device Manager (PDM) to program your device.
● Application Guides for setting up HART devices with SIMATIC PDM can be downloaded from our website at:
Product page (http://www.siemens.com/LR250) under Support.
8

Service and maintenance

8.1 Basic safety information
WARNING
Impermissible repair of the device
Repair must be carried out by Siemens authorized personnel only.
•
CAUTION
Releasing key lock
Improper modification of parameters could influence process safety.
Make sure that only authorized personnel may cancel the key locking of devices for safety-related applications.
•
32
to return to Measurement mode. SITRANS LR250 is now ready to
SITRANS LR250 (mA/HART)
A5E33469191-AA, 08/2014