Cleaning The Enclosure; Servicing The Remote Seal Measuring System; Return Procedure - Siemens SITRANS P300 7MF8.23 Serie Instrucciones De Funcionamiento Compactas

Cleaning the enclosure

Cleaning the enclosure
● Clean the outside of the enclosure and the display window using a cloth moistened with water or a mild detergent.
● Do not use aggressive cleaning agents or solvents. Plastic components or painted surfaces could be damaged.
WARNING
Electrostatic charge
Danger of explosion in hazardous areas if electrostatic charges develop e.g. when cleaning plastic enclosures with a dry
cloth.
● Prevent electrostatic charging in hazardous areas.

Servicing the remote seal measuring system

The remote seal measuring system usually does not need servicing.
If the mediums are contaminated, viscous or crystallized, it could be necessary to clean the diaphragm from time to time.
Use only a soft brush and a suitable solvent to remove the deposits from the diaphragm. Do not use corrosive cleaning
agents. Prevent the diaphragm from getting damaged due to sharp-edged tools.
CAUTION
Improper cleaning of diaphragm
Device damage. The diaphragm can be damaged.
● Do not use sharp or hard objects to clean the diaphragm.

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic pouch and attach it firmly to the
outside of the packaging. Any devices/replacement parts which are returned without a decontamination declaration will be
cleaned at your expense before further processing. For further details refer to the operating instructions.
See also
Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
Return goods delivery note (http://www.siemens.com/processinstrumentation/returngoodsnote)
Disposal
NOTICE
Special disposal required
The device includes components that require special disposal.
● Dispose of the device properly and environmentally through a local waste disposal contractor.
24
Devices identified by this symbol may not be disposed of in the municipal
waste disposal services under observance of the Directive 2002/96/EC on
waste electronic and electrical equipment (WEEE).
They can be returned to the supplier within the EC or to a locally approved
disposal service. Observe the specific regulations valid in your country.
SITRANS P300 (7MF8.23.. 7MF8.24.. 7MF8.25..)
A5E03434657-01, 08/2011